堆高機鏈條 Leaf Chain

| 關於美規AL型堆高機鏈條

美規AL型堆高機鏈條普遍使用於各種輕負載起重設備應用，其僅由鏈片及小軸組成，尺寸皆與同節距的美規標準滾子鏈條類似。

例如，AL6規格的堆高機鏈條與美規60滾子鏈條使用相同鏈片及小軸外徑。

針對易鏽環境，我們亦有防鏽塗層可供選擇。

 

| 關於歐規EL(LL)型堆高機鏈條

EL(LL)型歐規堆高機鏈條符合ISO標準，常用於輕型起重設備等應用，其僅由鏈片及小軸組成，尺寸與同節距的歐規標準滾子鏈條類似。

例如，EL6型(又稱LL12型)與歐規標準鏈條12B使用相同鏈片及小軸外徑。

如應用在易鏽環境，我們亦有防鏽塗層可供選擇。

| 特點

• 符合ISO標準
• 噴砂處理提高疲勞強度
• 高品質熱處理提高硬度及強度
• 出廠前鏈條皆已完成鏈條預拉及初始潤滑

| About AL Series Leaf Chain

AL series leaf chains are only consisted of plates and pins from ANSI standard roller chains.

The plates and pin diameter of AL leaf chains are similar to standard roller chains of same pitch.

For example, AL6 uses plates and pin diameter of ANSI 60 roller chain.

AL leaf chains are commonly used for load equipment and light lifting applications.

For corrosive environment, corrosion resistant coating is available.

| About EL(LL) Series Leaf Chain

EL (LL) series leaf chains made to ISO standards are constructed of plates and pin diameter similar to British standard roller chains of same pitch.

For example, EL6 (LL12) uses plates and pin diameter of BS 12B roller chain. 

EL leaf chains are commonly used for lightweight load equipment and light lifting applications.

For corrosive environment, CRF corrosion resistant coating is available.

| Features

• Heat treatment for improved hardness and strength
• Shot peening for improved fatigue strength 
• Pre-stretched to minimize initial stretch
• Pre-lubricated from the factory
• Corrosion resistant coating available

 

公司制服